ok, i've got the diagram from scooterhelp but i'm still stumped.
4 wires from the stator to the junction block, yellow, blue, green and yellowish-orange and black stripe
2 wires going from the stator to the coil, red and black
only 4 wires in the harness from the handlebar switch, yellow, blue, red and white.
now blue and yellow are self explanatory.
red goes to red on the coil.
this leaves the white wire unused, and the other 2 wires on the junction block unused.
green in the junction block goes to the horn i think (i could sacrifice this if necessary)
I don't know what yellowish-orange and black stripe is for.
i could substitute the white wire for this?
the motor is rebuilt and in the bike, it has oil and fuel, I wanna scoot!
same stator it had when i removed the motor (running with a broken piston)
new wiring harness...
i don't really understand how the coils on the stator power the system, so, i guess i'm done. my sense is that it needs another wire from the handlebar switch to the junction block (for yellowish-orange and black stripe) and use the white wire in the harness to power the lights from the coil?
I think I'll cut my losses and bring it to a professional.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum