Brand New! 125cc smallframe engine with carb and exhaust. *BUT* the Sensation used a single cable method of shifting, so you'd have to figure out how to make it work. Easiest way is a 'suicide shifter' or figure oiut some sort of 'push-pull' system.
*OR* part it out. You can transfer most all the parts in to other (post '64) smallframes. Use the top end, 4 speed gear box, new carb, new exhaust, electronic ignition, etc. You would need a different bearing for the crank to fit in Vespa cases though.
$350 and no I won't help figure out how to make the shifter work!
Last edited by Matty on Thu Oct 27, 2005 8:29 am; edited 2 times in total _________________ -Matt
-++-you can't spell jackass with out JKSC-++-
So what was the solution? I was thinking a second pully attached to the bottom of the engine at the pivot. The cables could go there and a rod straight back to actuate the system. The hard part would be construction so the rod and pulley would have the proper amount of "play". But that's always the problem isn't it.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum