The parts are off of or for a 76 Li150 Special (Serveta).
Front Axle Seal Set (new): $5
Front Axle Bearing Set (new): $20
Original Fuel Tap (not fast flow): $10
Used 80 Link Li/SX/TV chain: $25
Original Muffler: $30
rusty but no holes, will need to be cleaned out, I believe it needs a new U-bend
Li 1st Gear: $40
The drive gear teeth are in perfect shape but the kickstart teeth are a bit chipped up. See picts for actual condition.
Original Shifting Cursor/Cruciform: $10
Slips out of 4th gear, others held fine.
Used Air Hose/Bellows: $5
Not really made for, but will work on a Serveta with the filter in the tool box.
Kickstart Piston: $10
Worn a bit but not chipped.
Upper Chain Guide: $15
Still in pretty good shape.
USED Stock Fork Springs (set): $15
USED Fork Link Pivot Bushings: Free to anyone that wants them
Nylon bushing is in ok shape, steel inner bushings are included but rough. One steel bushing still has the remnants of the pivot bold that I had to bore out of it.
Last edited by LOREMipsum on Mon Jan 29, 2007 12:56 am; edited 2 times in total
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum